• Industrial drives

    Complete AC drives having a rich set of variants and options with following constructions: wall-mounted, cabinet built and modules. In most cases controlling one induction or synchronous motor. Normal two quadrant drives are complemented with regenerative and low harmonic series.


  • General purpose drives

    Complete AC drives to control typically one motor or multiple equal size induction motors having the same speed and load. Standard drives are easy to buy and configure. Drives are in following constructions: wall-mounted, cabinet built and modules.




  • Machinery drives

    AC drive modules designed to be included into machines utilizing variable speed control. Used together with induction, permanent magnet or reluctance motors.




  • Motion control drives

    Motors and drives for control of cyclic linear or angular position. Wide power range with servo and induction motors starting from compact servo drives to 3 phase drives with DC sharing.

  • Industrial multidrives

    AC drives supplying multiple motors and controlled by multiple control units. Principle is based on common DC bus enabling single power entry with diode, thyristor or IGBT Supply unit and enabling multiple inverters from the same DC bus. Drives are air or liquid cooled. The construction selection is done at supply level and inherited to inverters.


  • Drives for HVAC and Water

    Complete AC drives to control typically a HVAC fan or pump motor or multiple equal size motors. Drives are in following constructions: wall-mounted and cabinet.




  • Single drive combination

    This project type is meant for projects where combination of different drive categories is needed. Frequency converters from Industrial drives, General purpose drives, Drives for HVAC and Water as well as Machinery drives can be added to same project. This is useful when user want to calculate network harmonics or to select correct size of transformer for combination of different single drives from different categories.